language Express shipping
    local_shipping Urgent delivery possible
    shield NEN-EN-ISO 9001 certified
    quick_reorder Shipped the same day
language Express shipping
local_shipping Urgent delivery possible
shield NEN-EN-ISO 9001 certified
quick_reorder Shipped the same day
menu
discover_tune
/
and VAT settings
excl. BTW
discover_tune
/
en btw instellingen
excl. BTW

Chain drives

Kettingen in de aandrijftechniek worden gebruikt om kracht en beweging over te dragen tussen assen, vaak bij hoge belastingen en in situaties waar een betrouwbare en efficiënte overbrenging vereist is. Ze zijn bestand tegen slijtage, bieden een hoge krachtoverdracht en zijn efficiënt in het overbrengen van kracht over langere afstanden. Kettingen worden veel gebruikt in industriële machines, voertuigen, transportbanden en landbouwmachines. Ze zijn beschikbaar in verschillende types, zoals rollenkettingen en platte kettingen, afhankelijk van de toepassing en vereiste belastbaarheid. Kettingen vergen regelmatig onderhoud voor optimale prestaties.

Kettingen kunnen wij ook leveren als maatwerk in elke gewenste lengte (zie FAQ onderaan pagina)

At Aandrijftechniek.nl we advise and supply drive chains that should generate revenue for our customers, whether they come from our standard range or are custom-made. Our independent position is of great importance in this. Although we work closely with the best international brands, we make our decisions autonomously. We are guided exclusively by the application and the associated performance requirements. These factors determine the quality and price of our products.

Total supplier for chain technology

Our development from a specialist in roller chains and conveyor chains to a total supplier of drive solutions has given us unique expertise. We know better than anyone else which properties drive chains must meet to guarantee trouble-free production processes. Whether it concerns lightweight RVC chains, robust steel chains with a corrosion-resistant coating, parallel chains, low-maintenance chains or advanced lubrication techniques, we know the range and make what is not available.

Frequently asked questions about Chain Technique

Ja, dit kan zeker. Als u ons de exacte maat opgeeft kunnen wij een riem of ketting op elk gewenst formaat leveren.

Opm. maatwerk kan alleen niet geretourneerd worden. Wij maken hem volgens uw opgave.

The choice depends on three factors:

  • Transmissible power (kW) and rotational speed (rpm) → use the chain selection table based on the calculation force Fd = P × f / v (where f is the service factor).
  • Environmental conditions: corrosive environment → stainless steel chain; food products → maintenance-free chain (H-series, PTFE-grease-free).
  • Pitch: smaller pitch = more accurate movement and higher maximum speed; larger pitch = higher load capacity.

A roller chain must be replaced if the elongation exceeds 2% (measured over 12 spindle spacings = 12 × pitch). Check this with a chain stretch gauge. Other signs:

  • Lateral wear of the plates (chain runs wide)
  • Stiff links that do not move smoothly
  • Damaged or broken rollers
  • Chain jumps off the sprocket

Sag method (most commonly used): the sag on the slack side is ideally 2% of the center distance. With a center distance of 500 mm, this means approximately 10 mm of sag.

  • Too tight → overloading of bearings and increased chain wear.
  • Too loose → hitting, shaking and risk of missed teeth.

Check the voltage after the first 50 operating hours, and thereafter at every maintenance.

Ideal transmission ratio: 1:1 to 1:7. Above 1:7, wear increases rapidly due to the 'polygon effect'. Minimum number of teeth on the small sprocket: 17 (fewer teeth = more vibrations). The large sprocket preferably has a prime number of teeth (17, 19, 23…) so that wear is distributed evenly.

The rating ofaandrijvingtechniek.nl at WebwinkelKeur Reviews is 9,6/10 gebaseerd op 53 reviews.
[njwa_button id="105201"]