50021149 IWIS Roller chains IWIS

Specificaties

• Kettingsontwerp Duplex
• Kettingsmering ip2
• Corrosiebestendig Nee
• Rechte zijplaten Nee
• Minimale breekbelasting volgens ISO (kN) 44.5
• Gewicht (kg/m) 1.85
• Materiaal Steel
• Spoed (inch) 0.625
• Spoed (mm) 15.875
• Maximale rollerdikte (D1) (mm) 10.16
• Breedte tussen binnenplaten (mm) 9.65
• Maximale pennendiameter (D2) (mm) 5.08
• Maximale hoogte binnenplaat (H2) (mm) 14.4
• Minimale breekbelasting leverancier (kN) 56
• Dwarssteek (Pt) (mm) 16.59
• Onderhoudsvrij Nee
• ISO-standaardmaat 10B
• ISO-standaard ISO 606 BS
• Lageroppervlakte (cm²) 1.34
• Eenheden m
• Omschrijving (EN) JWIS Roller chains are characterised by an above-average service life due to excellent wear resistance, high consistency, matchless precision and a considerably higher breaking strength and fatigue strength than required by ISO standard. All iwis chains are pre-stretched and are provided with a highly efficient initial lubrication.
  iwis SL series chains (Super Longlife) have pins with an extremely hard surface. This special design shows outstanding characteristics: Highest wear resistance, a prolonged service life, high breaking and fatigue strength, low susceptibility to deficient operational lubrication, corrosion and frictional corrosion in the chain links.
  
  Highlights:
  
  • Only high-quality heat-treated and case-hardened steel is used with stringent specifications for materials analysis, tolerances and surface quality
  • Each chain part is manufactured a million times daily to the same precision and is monitored using SPC (statistical process control)
  • All chain parts are heat-treated, in some cases using special processes to optimize quality characteristics
  • Modern production technologies ensure consistent geometry and superior surface quality
  • Chains are checked for dimensional accuracy, length tolerance and flexibility, plus for the press fit joins on pins, outer plates and bush, and inner plate
  • Our high quality assurance standards comply with the requirements of ISO 9001:2006
  • For special applications: surface coatings, special lubricants, special materials (e.g. corrosion-resistant)
• Acc. to ISO 606 (kN) 44.5
• Acc. to ANSI (kN) 44.5
• Merk IWIS
• Gewicht (kg/m) 1.85
• Materiaal Steel
• Spoed (inch) 0.625
• Spoed (mm) 15.875